Fender BRONCO 40 Advanced Owner's Manual - Bronco
BRONCO
™
40
Footswitch
Connect a (optional) 1-button footswitch (P/N 0994049000)
into the FTSW jack to enable remote selection of your two
favorite presets. The LED (next to the FTSW jack) will turn
red
or
green
to indicate which footswitch preset is active.
To program the footswitch:
1.
Select a preset that you want to assign to the footswitch.
The preset must not be modified (the SAVE button must
NOT be illuminated to proceed to step 2).
2.
Press the SAVE button. The SAVE and EXIT buttons should
be flashing rapidly. You can press EXIT at this point to
cancel the footswitch assignment process.
3.
Press the footswitch button to select either the
red
or
green
LED next to the FTSW jack to associate with the
chosen preset.
4.
Press the SAVE button to confirm the footswitch
assignment. Now when you press the footswitch, the
chosen preset will be activated with the assigned
red
or
green
footswitch indicator.
USB Port
Use the USB port to connect the Bronco™ 40 amplifier
to your computer and take your music to the next
level in stereo:
•Use Fender® FUSE™ software to control your Bronco 40
fromyourcomputerandaccessbonusampfeaturesnot
availablefromtheBronco40alone.
♫
Please see the Fender FUSE manual at
fordetails.
•RecordandeditBronco40audioinstereousingAbleton®
LiveLite8Fender®Editionsoftware.
♫
Please see the Ableton® Live Lite 8 Fender edition at
fordetails.
•Stream live audio and play with people around the
worldusingFender®BANDJAM,poweredbyeJamming®
AUDiiO.
♫
Fora30-daytrialsubscription,logonto:
Factory Restore &
Firmware Update
Factory Restore
You can restore your Bronco 40 amplifier to the original
factory settings if desired. All user presets will be erased!
To restore the Bronco 40 amplifier to factory settings:
1.
Turn the amplifier OFF.
2.
Press and hold the EXIT button while turning the amplifier
ON. Continue holding the EXIT button until it is no longer
illuminated.
!
The FACTORY RESTORE function will erase all user
modified presets. It will also restore the
AMBER
bank
of presets and any effect selections that have been
modifiedusingFenderFUSEsoftware.
Firmware Update
From time to time, Fender may make available firmware
updates for your Bronco 40 amplifier to improve operation
or to add new features. To update the firmware on your
amplifier you will need to connect it through the USB port
to a computer with Fender FUSE software and an internet
connection.
♫
Please see the Fender FUSE manual at
fordetails.
FAQ
There are several great places you can go to learn more about
the Bronco 40 and music in general:
•
•Join a Fender Community forum where you can ask
questionsandreadthreads.There'sevenaforumjustfor
theBronco40:
www.fender.com/community/forums
•LogontotheFenderKnowledgeBasetodownloadand
read "Frequently Asked Questions" (FAQ):
•Findmusictheorylearningmaterialsandsheetmusicat
HalLeonardPublications:
USB
PHONES
AUX
5
f e n d e r . c o m