1. DL manuals
  2. Fender
  3. Musical Instrument Amplifier
  4. Mustang v.2
  5. Advanced Owner's Manual

Fender Mustang v.2 Advanced Owner's Manual

Other manuals for Mustang v.2: Quick Start Manual, Advanced Owner's Manual

Summary of Mustang v.2

  • Page 1

    Guitar amplifiers mustang (v.2) by fender ® ™ advanced owner's manual.

  • Page 2: Advanced Manual

    Mustang ™ iii/iv/v (v.2) advanced manual introduction this manual is your step-by-step guide to the advanced features found on your mustang™ (v.2) amplifier. Turn to page 10 for the mustang i / ii advanced manual. For information on using fender® fuse™, ableton® live or amplitube®, please see the se...

  • Page 3: Amplifier Menus

    Mustang ™ iii/iv/v (v.2) amplifier menus select amplifier models and adjust amplifier settings using the amp menus. Amplifier models to select amplifier models: 1. Press the amp button. 2. Turn the data wheel to select one of 17 amplifier models: amp models studio preamp '57 champ '57 deluxe '57 twi...

  • Page 4: ♫

    Mustang ™ iii/iv/v (v.2) effects tables continued from previous page... Delay reverb mono delay small hall mono echo filter large hall stereo echo filter small room multitap delay large room ping pong delay small plate ducking delay large plate reverse delay ambient tape delay arena stereo tape dela...

  • Page 5: Guitar Tuner

    Mustang ™ iii/iv/v (v.2) 1. To save a preset you should first modify an existing preset, for example, by turning any of the programmable knobs, such as gain. 2. Press the save button. The save and exit buttons should be illuminated. You can press exit at this point to cancel the save process. 3. Tur...

  • Page 6: ♫

    Mustang ™ iii/iv/v (v.2) • mode 3—in mode 3 the footswitch is used to bypass the stompbox, modulation or delay effects, using the buttons labeled: stomp / mod / delay (in line with the mode 3 led). The footswitch button leds indicate the effects that are active, just like the buttons on the amplifie...

  • Page 7: ♫

    Mustang ™ iii/iv/v (v.2) ♫ for example, if you only want the middle third of the pedal range to register with the amplifier, only move the exp-1 pedal back and forth through the middle third of its range of motion. You must start the calibra- tion process with the exp-1 pedal positioned some- where ...

  • Page 8: Utility Menus

    Mustang ™ iii/iv/v (v.2) utility menus press the util button to activate the utility menus. Press the util button repeatedly to step through each of the nine menus, listed below. • quick access #1 / #2 / #3 — use the first three utility menus to choose quick access presets. You can then access those...

  • Page 9: Usb Port

    Mustang ™ iii/iv/v (v.2) usb port use the usb port to connect the mustang™ amplifier to your computer and take your music to the next level: • use fender® fuse™ software to control your mustang from your computer and access bonus amp features not available from the mustang alone. ♫ please see the fe...

  • Page 10: Advanced Manual

    Advanced manual introduction this manual is your step-by-step guide to all the advanced features found on your mustang™ i / ii amplifier. For information on using fender® fuse™, ableton® live or amplitube®, please see the separate manuals for each product available at www.Fender.Com/support . Naviga...

  • Page 11: ♫

    Mod dly/rev mod dly/rev these leds are linked to whichever knob has been the last turned. These leds are numbered 1, 2, 3 and correspond to the three positions within each of the selection ranges a, b, c, d on each knob. Use the leds to determine exactly which position the knob is pointing to, for e...

  • Page 12: Tuner Button

    Tuner button your mustang™ amplifier has a built-in tuner mode that turns the control panel leds into a chromatic guitar tuner. To use the tuner: 1. Press and hold the tap button for 2 seconds. The tap and exit buttons will illuminate. 2. Strike any single string on your guitar and watch the panel l...

  • Page 13: Footswitch

    Footswitch connect a (optional) 1-button footswitch (p/n 0994049000) into the ftsw jack to enable remote selection of your two favorite presets. The led (next to the ftsw jack) will turn red or green to indicate which footswitch preset is active. To program the footswitch: 1. Select a preset that yo...

  • Page 14

    This product is covered by one or more of the following patents: us pat. 6,222,110 amplificador de audio importado por: instrumentos musicales fender s.A. De c.V., calle huerta # 132, col. Carlos pacheco, c.P. 228890, ensenada, baja california, mexico. Rfc: imf870506r5a hecho en china. Servicio de c...