Ferax BRH-1500 Manual - 4. Description
36
• Using the tool for different applications, or
with different or poorly maintainted accesso-
ries, may significantly increase the exposure
level.
• The times when the tool is switched off or
when it is running but not actually doing the
job, may signifi cantly reduce the exposure
level.
Protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns.
4. DESCRIPTION
Your hammer drill has been designed for dril-
ling holes into wood, steel, and masonry. The
machine can also be used as a demolition ham-
mer in combination with the SDS chisels.
Component list
1. Locking sleeve
2. Hammer or chisel action selector switch
3. Grease box cover
4. On / Off switch
5. Lock button
6. Hammer or drilling action selector switch
7. Dust cover
8. Depth gauge
9. Chisels (point and flat)
10. SDS drill bits
11. Auxiliary Handle
Accessories
1 Auxiliary handle
1 Depth gauge
3 SDS drill bits (8, 10)
2 SDS Chisel (1 flat+1 pointed)
1 Plastic container grease
1 Dust cover
1 Spanner
We recommend that you purchase your acces-
sories from the same store that sold you the
tool. Use good quality accessories marked with
a well-known brand name. Choose the type
according to the work you intend to undertake.
Refer to the accessory packaging for further
details. Store personnel can assist you and offer
advice.
5. OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read
the instruction book carefully.
5.1 Adjusting the auxiliary handle
(See A)
For your personal safety we recommend using
the auxiliary handle at all times. To adjust the
handle, loosen the bottom of the handle anti-
clockwise and rotate the handle around the
handle collar until the handle is in the desired
position. Tighten fully.