Ferax BRH-1500 Manual - 6. Cleaning and

39

5.9 Dust cover (See K)

Use the dust cover to prevent dust from falling 

over the tool and on your self when performing 

overhead drilling operations. Attach the dust 

cover to the bit as shown in the K.

5.10  Lubrication machine (See L, M)

The machine has a grease-packed lubrication 

system. Regularly check if there is sufficient 

grease in the box every 10 hours of usage. To 

check and to add grease, firstly remove the box 

cover with a screwdriver(not provided). Then 

use the spanner provided to open the Grease 

box. See Fig L-M. If it is not enough, supply 

more grease provided with your tool into the 

box. The grease specification is general pur-

pose lithium based.

CAUTION: 

Keep the container of grease away 

from children.

6. CLEANING AND 

 MAINTENANCE

Before cleaning and maintenance, 

always switch off the machine and 

remove the mains plug from the mains.

•  Regularly clean the housing with a soft cloth.

•  Keep the ventilation slots free from dust and 

dirt. If necessary, use a soft, moist cloth to 

remove dust and dirt from the ventilation 

slots.

Lubrication 

•  Regularly grease the shaft in which the acces

-

sories must be inserted.

•  Regularly  check  the  grease  level  inside  the 

machine:

• Remove the cover from the lubrication point 

(3) using a screwdriver.

• Remove the cap from the lubrication point 

(3).

• If necessary, add some grease into the lubri

-

cation point (3).

• Mount the cap to the lubrication point (3).

• Mount the cover to the lubrication point (3) 

using a screwdriver.

• Checking and replacing the carbon brushes .

• The carbon brushes must be checked regu

-

larly. If the carbon brushes are worn, the