Ferax BRH-1500 Manual - 7. Warranty
40
machine will start to run unevenly.
Only use the correct type of carbon
brushes.
• Remove the carbon brush holders using a
screwdriver.
• Clean the carbon brushes.
• In case of wear, replace both carbon brushes
at the same time.
• Mount the carbon brush holders using a
screwdriver.
• After mounting the new carbon brushes, let
the machine run at no load for 15 minutes.
7. WARRANTY
Consult the enclosed warranty terms.
8. ENVIRONMENT
Disposal
The product, the accessories, and the
packaging must be sorted for environ-
mentally friendly recycling.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2002/96/EC for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable
must be collected separately and disposed of in
an environmentally friendly way.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.