Ferguson RCU640 User Manual - Rcu640 V.2
5
RCU640 v.2
ENGLISH
Reset / delete function
1. Press TV and 0 button simultaneously.
2. When POWER button flashes three times
and stop, it means that all the set-up
data and commands for TV in the remote
control are deleted and remote go back to
factory default settings..
Display TV Code
You can call up the TV code which you
have set in your new remote control as
follows:
1. Press and hold down the TV button
simultaneously press number button 1
to display the thousands of the 4-digit
code. Count how often the POWER button
flashes. If the POWER button does not
flash, the number is ZERO.
2. Press and hold down the TV button
simultaneously press number button 2 to
display the hundreds of the 4-digit code.
3. Press and hold down the TV button
simultaneously press number button 3 to
display the tens of the 4-digit code.
4. Press and hold down the TV button
simultaneously press number button 4 to
display the ones of the 4-digit code.
Example for code 0075:
1. Press TV and 1 LED flashes Zero times.
2. Press TV and 2 LED flashes Zero times.
3. Press TV and 3 LED flashes Seven times.
4. Press TV and 4 LED flashes Five times.