Ferroli LIFE User Manual - page 21
5
GENERAL SPECIFICATIONS
REMOTE CONTROL
The remote control (Fig. 1) has a series of keys and a display which visualizes all the activated functions and the
various parameters the user and installer need in order to correctly use the unit itself.
Button description
1 . "ON/OFF" key to turn the air conditioner on and off.
2 . "MODE" key to select the operating mode: AUTO -
COOL- DRY - FAN - HEAT:
AUTO: The conditioner automatically sets the suitable
operating mode (HEAT, DRY, FAN, COOL) depending
on room temperature.
COOL: The unit begins to operate if the set temperature
is lower than that of the room.
DRY for Dehumidify
FAN: the unit get the air automatically circulating in the
room.
HEAT: The unit begins to operate if the set temperature
is higher than that of the room.
3 . "FAN" key to set the fan speed by the choosing Auto-
matic - low - mid - high
4 . "SLEEP" key, overnight button to set/cancel the Sle-
ep mode regardless of the operating mode of the con-
ditioner.
5 . “FRESH” button Pushing this button to activate the
FRESH function. Pushing it again to disable.
6 . "TURBO" button to enable/disable the rapid cooling
mode.
7 . “SELF CLEAN” button allows you to activate or
deactivate the SELF CLEAN to the drying of the internal
coil in order to prevent the formation of odors.
8 . Tasto “LED” button to enable/disable the display of
the unit.
9 . “FOLLOW ME” button Push this button to initiate the
Follow Me feature, the remote display is actual tempera-
ture at its location. The remote control will send this signal
to the air conditioner every 3 minutes interval until press
the Follow Me button again. The air conditioner will cancel
the Follow Me feature automatically if it does not receive
the signal during any 7 minute interval.
Fig. 1
10-11 . "
" button.Used to stop or start horizontal louver move- ment or set the desired up/down air flow
direction
12 . Tasti “TIMER OFF” button to enable the TIMER mode
13 . Tasti “TIMER ON” button to disable the TIMER mode
14 . “SILENCE FP” button. Active/Disable SILENCE funct,ion. If pushing more than 2 seconds, the FP function will
be activated, pushing more than 2 seconds again to disable. The unit will operate at a setting temperature of 8°C.
11 . "TEMP" button . For setting "TEMP" (▲) it sets the increase, (▼) sets its decline. If you activate the TIMER
function enables you to set the time for switching off desired.