Fervi 0554 User And Maintenance Manual - 2 Safety Warnings
MACHINES AND
ACCESSORIES
Page 6 of 31
2 SAFETY WARNINGS
2.1 General safety rules for machine equipment
Risks associated with using
the machine
DO NOT underestimate the risks associated with using the machine and concentrate on the
work in progress.
Risks associated with using
the machine
Despite the implementation of all safety devices for safe use of the machine, it is necessary
take note of all the requirements for the prevention of the accidents reported in various parts
of this manual.
Risks associated with using
the machine
Every person who is responsible for the use and maintenance of the machine should have first
read the instruction manual, particularly the chapter on safety information.
It is recommended that the plant safety manager get written confirmation of the above.
Operator Protection
Before starting any type of work on the machine, the operator must wear appropriate
personal protective equipment (PPE) such as goggles and gloves.
1. Read this manual carefully, in order to work safely.
2. Always check the efficiency and integrity of the machine.
3. Before connecting the machine to the mains, make sure that the rotating parts are not
damaged or badly worn. Make sure that the switch is in the neutral position.
4. Do not start the machine in an enclosed or poorly ventilated area, or in the presence of a
flammable and/or explosive atmosphere. Do not use the machine in damp and/or wet
locations, or those exposed to rain.
5. Avoid starting accidentally.
6. Before starting the machine, get used to ensuring that no remaining maintenance and
service keys are inserted.
7. Keep the workplace tidy and free from obstruction; disorder causes accidents.
8. Make sure that the work environment is forbidden to children, non-employees and
animals.
9. Do not perform tasks on the machine other than those for which it was designed. Only use
the machine in the manner in which it was intended, as described in this instruction
manual.
10.Work without disturbances.
11.Work areas must be well lit.
12.Always wear eye protection and protective gloves while working. If dust is produced, use
the appropriate masks.