Fetco®, luxus®, extractor®, intermittent brew, and driven to pioneer innovation™ are trademarks or trade names of food equipment technologies company. © 2009 food equipment technologies company part # p021 rev. 002 notice to installer: please leave this book with the machine. Www.Fetco.Com www.Fetco...
2 contact information contact information contact information contact information fetco ® food equipment technologies company 600 rose road lake zurich • il • 60047-0429 • usa website: www.Fetco.Com service & support: hours: 7:00 am - 6:00 pm central, monday - friday phone: (800) 338-2699 (us & cana...
3 electrical configuration and brewing efficiency us & canada cbs-2051e 1.5 gallons per batch electrical heater voltage maximum batches per hour* (max 11) config. Code configuration (ac) phase wires kw amp draw cold water hot water e51016 2 x 3 kw 120/208 4.6 22.1 7.7 11.0 120/220 single 3 + ground ...
4 dimensions & utility connections dimensions & utility connections dimensions & utility connections dimensions & utility connections dwg 201100-000 dwg 201101-000 cbs-2052e cbs-2051e.
5 dwg 201129-000 cbs-2052e20
6 installation installation installation installation (for qualified service technicians only) keys to a successful installation if not installed correctly by qualified personnel, the brewer may not operate properly and damage may result. Damages resulting from improper installation are not covered ...
7 l1 l1 l1 l1 l2 l2 l2 l2 n n n n ground lug ground lug ground lug ground lug ground ground ground ground wire wire wire wire n n n n 208 208 208 208----240v 240v 240v 240v 120v 120v 120v 120v 120v 120v 120v 120v electrical connection 1. Verify that the actual voltage at the electrical service conne...
8 incoming power: connect wires to l1, l2, n, ground heater wires: connect wires 1 & 2 to l1 connect wires 4 & 5 to l2 connect wires 3 & 6 to l3 incoming power: connect wires to l1, l2, l3, n, grnd heater wires: connect wires 1 & 2 to l1 connect wires 3 & 4 to l2 connect wires 5 & 6 to l3 for brewer...
9 operating instructions operating instructions operating instructions operating instructions control panel functions only switches that are active are illuminated. Switches that are inactive or disabled are invisible. Main power switch controls all power to brewer indicator lamp at top of panel. Co...
10 programming programming programming programming batch settings display turn the brewer off by pressing the main power switch. Press the main power switch again to turn the unit on. 52 the last 2 digits of the model number will display briefly, then s t b. S t b quickly hold the stop button for 3 ...
11 temperature settings parameter name range default setting comment 7 water temp. (°f) 180°f - 208°f 200°f inside tank. Will be slightly lower at spray head. To display in ° celsius, see # 58 in advanced settings. 8 hot water service a (auto) / on / off a (auto) a= faucet will dispense only when no...
12 address description range default comment 60 and 61 left brew valve flow rate right brew valve flow rate 0.09 – 1.49 if #59 is gal or 0.33 – 5.63 if #59 is ltr 0.92 3.48 62 and 63 left bypass valve flow rate right bypass valve flow rate 0.28 – 0.38 if #59 is gal or 1.05 – 1.44 if #59 is ltr 0.33 ...
13 error codes error codes error codes error codes code description possible cause corrective action how to clear error codes 001 internal error system had to reload default settings. Control board failure. Clear error. Re-program the brewer to the desired specifications. If error occurs again, repl...
14 cleaning & maintenanc cleaning & maintenanc cleaning & maintenanc cleaning & maintenance e e e daily: wipe the area above the brew basket to remove coffee residue. Daily or weekly: csd versions: clean the cascading spray dome (csd) with a soft brush and detergent. It may also be cleaned in a dish...
Parts figure 1 – cbs-2051e main assembly dwg 101191-b item # qty part # new part # description 1 1 001049 weldment cbs-2051e 2 1 57006 fill valve, s-53 120vac 2 1 57017 fill valve, s-53 220vac export 220v only 2 1 57090 fill valve, s-53 200vac japan 200v only 3 1 24012 1024.00020.00 gasket, s-53 fil...
18 4 15007 1084.00023.00 standoff, male-female, threaded hex 4-40-1/2" 19 4 29007 1029.00006.00 nut, #4-40 knurled thumb 20 1 51042 1051.00011.00 board, power supply-120vac 20 1 51055 board, power supply-220vac export 220v only 20 1 51056 board, power supply-200vac japan 200v only 21 4 29019 1029.00...
Figure 2 – cbs-2051e tank assembly dwg 104029-c item # qty old part # new part # description 1 1 4039 weldment, tank cbs-2051e 2 1 83041 1083.00014.00 washer, .812"od x .412"id, flat 3 1 31005 1031.00032.00 fitting, 90 elbow, 1/4 hose id x 1/8 mpt 4 1 31116 1031.00020.00 locknut 1/8 straight pipe th...
Figure 3 – cbs-2052e / 2052e20 main assembly dwg 101197-b item # qty old part # new part # description 2 2 86021 1086.00011.00 bushing, snap, 1.375 mtg hole 3 2 86018 1086.00019.00 plug, dome, 1.375 mounting hole 4 2 86032 1086.00004.00 bushing, snap, 1" mounting hole dia 5 1 102189 1102.00106.00 as...
20 6 83051 1083.00016.00 washer, #8 screw size, flat 21 1 002065 1112.00093.00 weldment, hot water faucet 22 1 33007 1013.00030.00 locknut, 7/16 straight pipe thread 23 1 45082 1045.00010.00 overlay, cbs-2052e 24 2 102102 assembly, large spray head, 120v (see fig 5) 24 2 102159 assembly, large spray...
Figure 4 – cbs-2052e / 2052e20 tank assembly dwg 104026-a item # qty old part # new part # description 1 1 004038 1114.00019.00 weldment, tank cbs-2052e 2 3 31021 1031.00029.00 bushing, 3/4-16 x 1/4 npsm, hex head 3 1 84007 1084.00022.00 nut, 3/4-16 hex jam 4 1 31082 1031.00026.00 fitting, hex nippl...
22 3 03332 1003.00005.00 bracket 2, one shot thermostat 23 3 53071 1053.00004.00 thermostat, single shot,triac 24 12 83011 1083.00009.00 washer, #6 screw size, internal 25 12 84001 1084.00012.00 nut, hex, #6-32 machine screw 26 3 31117 1031.00007.00 locknut 1/4 straight pipe thread 27 1 31081 plug, ...
Figure 5 – spray housing assembly, 120 vac, part # 102102 spray housing assembly, 220 vac, part # 102159 (export only) item # qty old part # new part # description 1 4 82112 #8 x 3/4'' pan hd. Phil. T.S. 18-8 s.S. Screw 2* 1 k054 1000.00054.00 brew valve replacement kit, 120vac 2* 1 k055 1000.00055....
Figure 6 – brew basket assembly, 16” x 6”, part # 101165 item part # new part # description 1 82096 1082.00040.00 handle screw 2 23117 1023.00089.00 brew basket handle, black (includes magnet) 3 9006 wire insert, 16 x 6 not shown 46011 1046.00007.00 warning label not shown f001 paper filters, 15” x ...
Coffee brewer operating instructions select a coffee dispenser and make sure that it is empty before stating a brew cycle. Make sure the dispensers cover plug is in the opened position. Select the desired batch button and push and hold for two seconds. The stop button will illuminate and the batch b...
