Fhiaba 0FR User Manual - page 13
39
5
5.3
www.fhiaba.com ∙ info@fhiaba.com ∙ Tel +39 (0)434 420160 ∙ Fax +39 (0)434 420161
EN
Settings and Special Functions
How to activate the cube size function
How to deactivate
How to activate the SuperIce function
How to deactivate
The function makes it possible to comply to certain religious
observances requiring that the operation of the appliance
is not affected by the opening or closing of the doors (the
thermostatic control, the inner lighting and the ice maker
are deactivated).
Sabbath Mode (Optional)
How to activate
How to deactivate
The View Status function permits visualizing the time left be-
fore the filter needs to be replaced.
Water Filter
How to check the status of the filter
The Reset Filter function sets to zero the time left before the
filter needs to be replaced. It is necessary to set the meter
to zero each time the cartridge is replaced. As an alterna-
tive press for 5 seconds the Enter button
Reset Filter
How to set the filtered water meter to zero
This function is to be activated when it is not necessary to
filter the water, because excellent quality water is already
available from the home water system.
Bypass Filter
How to activate filter Bypass
How to deactivate filter Bypass
If ice production has been disabled or unused for a long
period it is recommended to perform a Manual Clean func-
tion to flush out water which has sat in the system during
this period. Repeat the operation until the water is clean.
Before proceeding it is important to turn off the ice maker
by pressing button .
Manual Clean, Water Filter
Correctly position the ice tray or another suitable container
under the IceMaker to collect water, then close the drawer.
At the end of the operation, wash the tray.
How to manually clean the filter
Basic settings of the Menu
Select the Menu button
and used the Up/Down button
to select
.
The freezer compartment can, if required, be converted to
the refrigeration o Fresco operating mode.
TriMode Options
How to set the Fridge function
How to set the Fresco function
How to revert to the Freezer function
This offers the possibility to reset default factory settings
and cancels any previous changes.
Default Setting
How to reset default settings