Fhiaba 0FR User Manual - page 14
40
5
www.fhiaba.com ∙ info@fhiaba.com ∙ Tel +39 (0)434 420160 ∙ Fax +39 (0)434 420161
Settings and Special Functions
Time
Set Time
How to set the time
Using this function it is possible to deactivate/activate the
date visualization on the display.
Show Date
How to activate the date
How to deactivate the date
Date
Set Date
How to set the date
ATTENTION: If the default settings are restored, the default mode
of the TriMode compartment is freezer mode. If it was previously
being used in refrigerator or Fresco mode be sure to set it back to
your desired setting.
The display shows the hours and minutes in the format
hh:mm and with hh: blinking. Use the Up/Down buttons
to modify the setting and then confirm by pressing Enter
to go on to the next setting.
Once the minutes are confirmed, the time will be set.
The display will show the date in the format dd:mm:yy
(day:month:year), the day will blink. Use the Up/Down
buttons to modify the setting, confirm with Enter to
go on to the next setting; once the year is confirmed the
date will be set.
This function permits visualizing the temperature in Centi-
grade or Fahrenheit degrees. Normally, the appliance is
set for visualization in centigrade degrees.
Set °C/°F
How to set the temperature in Centigrade
How to set the temperature in Fahrenheit
Through this function it is possible to activate/deactivate
the constant visualization of the time.
The function allows selection of the language for the display
messages.
This function selects the display at 12 or 24 h.
Show Time
How to activate the permanent time
How to deactivate
Language
Italian
English
French
German
Spanish
Set 12/24
How to set the display to 12 h
How to set the display to 24 h
Through this function it is possible to activate/deactivate
the keypad lock.
keypad lock
keypad lock
Keypad lock
How to activate
How to deactivate