Fhiaba 0H User Manual - page 11
63
5
5.3
www.fhiaba.com ∙ info@fhiaba.com ∙ Info Line 800-344222 ∙ Tel +39 (0)434 420160 ∙ Fax +39 (0)434 420161
EN
Settings and Special Functions
This function (recommended in case of prolonged absenc-
es since it allows considerable energy savings) brings the
Tri-Mode compartment temperature to - 18°C (46.4°F).
It is possible to program the duration, or it can be manually
deactivated upon re-entry after a period of absence.
This function remains active even if during the period of
absence there is a prolonged interruption of electrical
power.
It is possible to program a period from 1 to 90 days.
This function can be activated when it is necessary to cool
off beverages quickly, by placing them inside the freezer
compartment.
It is possible to select a duration of 1 to 45 minutes. A sound
signal will indicated when the optimal temperature has
been reached.
After removing the beverages, deactivate the sound sig-
nal by pressing the Alarm button .
Bottle Cooler
How to activate
How to deactivate upon re-entry
How to program the duration
How to activate
How to deactivate
How to program the duration
Vacation TriMode
The function makes it possible to comply to certain religious
observances requiring that the operation of the appliance
is not affected by the opening or closing of the doors (the
thermostatic control, the inner lighting and the ice maker
are deactivated).
Sabbath Mode (Optional)
How to activate
How to deactivate
Basic settings of the Menu
Select the Menu button and used the Up/Down button
to select
.
The freezer compartment can, if required, be converted to
the refrigeration o Crisper-Fresco operating mode.
TriMode Options
How to set the Fridge function
How to set the Crisper-Fresco function
How to revert to the Freezer function
This offers the possibility to reset default factory settings
and cancels any previous changes.
Default Setting
How to reset default settings
ATTENTION: If the default settings are restored, it is necessary to
reactivate the choice of operation of the TriMode compartment in
case it was previously set as Fridge or Fresco.
Using this function it is possible to deactivate/activate the
date visualization on the display.
Show Date
How to activate the date
How to deactivate the date
The display will visualize the date in the format dd:mm:yy
(day:month:year), the day will blink. Use the Up/Down but-
tons to modify the setting, confirm with Enter to go on
to the next setting; once the year is confirmed the date will
be set.
Date
Set Date
How to set the date