Fhiaba Classic Series User Manual - page 15
13
5
www.fhiaba.com ∙ info@fhiaba.com ∙ Info Line 800-344222 ∙ Tel +39 (0)434 420160 ∙ Fax +39 (0)434 420161
Settings and Special Functions
The View Status function permits visualizing the exact quantity of filtered
water in liters and the time left before the filter needs to be replaced.
The Reset Filter function sets to zero the quantity of water filtered and the time
left before the filter needs to be replaced. It is necessary to set the meter to
zero each time the cartridge is replaced.
After 30 days from the appearance of the message “Replace Filter Car-
tridge”, ice production will be suspended and the display will visualize the
message “No Water”. To once again activate ice production it is necessary
to set the filtered water meter to zero via the Reset Filter function. The days
and the liters available before filter replacement is necessary are indicated.
This function is to be activated when it is not necessary to filter the water,
because excellent quality water is already available from the home wa-
ter system.
If the ice production is disabled for long period, the water circuit is au-
tomatically cleaned. Nevertheless, in particular cases, it is possible to
manually intervene and perform a supplementary cleaning.
Repeat the operation until the water is clean.
Correctly position the ice tray or another suitable
container under the IceMaker to collect water, then
close the drawer. At the end of the operation, wash
the tray.
Water Filter
Reset Filter
Bypass Filter
Manual Clean, Water Filter
How to check the status of the filter
How to set the filtered water meter to zero
How to activate filter Bypass
How to manually clean the filter
The View Status function permits visualizing the exact quantity of filtered
air in liters and the time left before the filter needs to be replaced.
The Reset Filter function sets to zero the quantity of air filtered and the
time left before the filter needs to be replaced. It is necessary to set the
meter to zero each time the cartridge is replaced.
Air Filter
How to check the status of the filter
How to set the filtered air meter to zero