FHP CA CONSOLE series Installation Instructions Manual - Cuc Solid State
970-293 Revised 05-12
FHP introduces the latest in console solid state control technology. Designed to
enhance the unit operation with more flexibility, accurate control and
operating modes the CUC provides an increased level of comfort in the
conditioned space together with solid state reliability and ease of operation.
The same functions of the proven UPM module are incorporated into the CUC
for unit protection.
CUC controllers are standard on all FHP
series CA/CS console units except for
remote and master/slave options.
•
Tactile touchpad for
temperature, fan and mode
adjustment.
•
Digital display of temperature
in either degrees Fahrenheit or
Celsius.
•
LED Display provides
indication for unit operating mode as well as fan speed and fault
indication for high or low pressure lockout.
•
Adjustable Temperature Set point from 60° F through 80° F (15.5° C
through 26.7° C ).
•
Adjustable Temperature Differential between 1° F and 6° F
(0.6° C and 3.3° C).
•
Selectable options
•
Manual/Automatic changeover
•
Fan speed – High or Low
•
Fan operation constant fan or cycling with compressor
•
Additional features
•
5 minute anti short cycling delay
•
Random start
•
90 second low pressure bypass timer prevents nuisance lockouts
during cold winter start up
•
Intelligent reset allows the unit to automatically restart after 5
minutes if a fault is no longer active
CUC SOLID STATE
CONSOLE UNIT CONTROLLER
15
CA CONSOLE SERIES