Fiat Blue&Me User Manual - page 54
53
BLUE&ME
™
in conjunction with Instant Nav
– If you want to register your mobile
phone again, the old registration must be
deleted first. All the user data registered
in the system is deleted during this oper-
ation. To delete the old registration, use
the USER DATA, DELETE USERS option.
On your mobile phone, delete the
“Blue&Me” device from the list of Blue-
tooth
®
devices following the instructions
in your mobile phone manual (you cannot
automatically download the directory on
all mobile phones).
– If you copy a phone directory that
contains more than 1000 names, the sys-
tem may work slowly and there may be
a deterioration in the voice recognition of
the names in your phone directory.
– If the registration you have made is in-
advertently cancelled, the procedure will
have to be repeated.
ADVANCED OPTIONS
?
To access the ADVANCED OP-
TIONS menu, using manual interac-
tion, proceed as follows:
Access the Main Menu by pressing
ß
and select the SETTINGS OPTION by
pressing OK or
ß
.
Select the ADVANCED OPTIONS
menu and then press OK or
ß
.
}
Or, through voice commands:
Press
‘
and say “SETTINGS” and
then “ADVANCED OPTIONS”.
In the ADVANCED OPTIONS, you
can access the SYSTEM CODE and
change the GPRS code.
Note
The SYSTEM CODE is an 8 digit num-
ber which unequivocally identifies the sys-
tem on your vehicle and cannot be
changed.
Access to system code
To carry out some of the operations it
may be necessary to know the identifica-
tion code for your system.
?
To access this code, through manual
interaction, proceed as follows:
Select the option SYSTEM CODE: and
then press OK or
ß
.
The panel display will show the code
for your system.
To exit this display, press OK or
ß
or ESC.
}
Or, through voice commands:
Press
‘
and say “Settings” and then,
at the end of the message from the
system say “Read code”.
The panel display will show the code
for your system.
To exit this menu option, press OK
or
ß
or ESC.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 53