Fiat Bravo sound system Owner's Manual - page 62
61
SAFETY DEVICES
CORRECT USE OF THE CAR
WARNING LIGHTS AND MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD AND CONTROLS
DEVICE ENGAGEMENT
Turn knurled ring A-fig. 54 to ON.
The device may only be engaged in 4
th
or
higher speeds. Travelling downhill with the
device engaged, the car speed may in-
crease more than the memorised one.
When the device is activated, the warning
light Ü on the instrument panel turns on
(together with the message on the display)
(see section “Warning lights and mes-
sages”).
TO MEMORISE SPEED
Proceed as follows:
❒ turn the knurled ring A-fig. 54 to ON
and press the accelerator pedal to the
required speed;
❒ turn the knurled ring B to (+) for at
least three seconds, then release it. The
car speed is memorised and it is there-
fore possible to release the accelerator
pedal.
In the case of need (when overtaking for
instance) acceleration is possible simply
pressing the accelerator pedal: releasing
the accelerator pedal, the car will return
to the speed memorised previously.
fig. 54
F0Q0648m
CRUISE CONTROL
(constant speed
regulator)
(for versions/markets, where provided)
It is a device able to support the driver,
with electronic control, which allows dri-
ving at speed over 30 km/h on long and
straight dry roads (e.g.: motorways), at a
desired speed, without pressing the ac-
celerator pedal.
Therefore it is not suggested to use this
device on extra-urban roads with traffic.
Do not use it in town.
057-082 BRAVO GB.qxd 11-11-2009 10:53 Pagina 61