Fiat Bravo sound system Owner's Manual - page 63
62
SAFETY DEVICES
CORRECT USE OF THE CAR
WARNING LIGHTS AND MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD AND CONTROLS
Whilst driving with the de-
vice on, do not place the
gear lever in neutral and do not move
the Dualogic gear lever into position
N or R.
WARNING
In the event of device mal-
function or failure, turn the
knurled ring A-fig. 54 to OFF and con-
tact a Fiat Dealership after checking
the protection fuse integrity.
WARNING
TO RESET THE
MEMORISED SPEED
If the device has been disengaged for ex-
ample pressing the brake or clutch pedal,
the memorised speed can be reset as fol-
lows:
❒ accelerate gradually until reaching a
speed approaching the one memorised;
❒ engage the gear selected at the time of
speed memorising (4
th
, 5
th
or 6
th
gear);
❒ press button C-fig. 54.
TO INCREASE THE
MEMORISED SPEED
The speed memorised can be increased in
two ways:
❒ pressing the accelerator and then mem-
orising the new speed reached;
or
❒ turning the knurled ring B-fig. 54 tem-
porarily to (+).
Each turn of the knurled ring will corre-
spond to a slight increase in speed (about
1 km/h), while keeping the knurled ring
turned will correspond to a continuous
speed increase.
TO REDUCE
MEMORISED SPEED
The speed memorised can be increased in
two ways:
❒ disengaging the device and then mem-
orising the new speed;
or
❒ keeping the knurled ring B-fig. 54 to
(–) until reaching the new speed which
will be memorised automatically.
Each turn of the knurled ring will corre-
spond to a slight reduction in speed (about
1 km/h), while keeping the knurled ring
turned will correspond to a continuous
speed reduction.
DEVICE DISENGAGEMENT
Turn the knurled ring A-fig. 54 to OFF
or the ignition key to STOP. The device
is automatically deactivated also in one of
the following cases:
❒ pressing the brake or clutch pedal;
❒ ASR or ESP cut-in (for versions/ mar-
kets, where provided);
❒ changing gear on versions with a Dua-
logic gearbox (for versions/markets,
where provided), if in Manual mode
❒ inadvertently moving the Dualogic gear
lever (for versions/markets, where pro-
vided) to position N or R.
057-082 BRAVO GB.qxd 11-11-2009 10:53 Pagina 62