Fiat Doblo Owner's Handbook Manual - page 123
122
IN AN EMERGENCY
To change a wheel proceed as
follows:
1) Stop the vehicle in a position that
is not dangerous for oncoming traffic
where you can change the wheel safe-
ly. The ground should be flat and ad-
equately firm.
Do not lubricate the bolt
threads before fitting
them back: they could
come loose.
Fasten the wheel cap correctly
to prevent the wheel from com-
ing free in motion.
Never tamper with the inflation
valve.
Never place tools between the
rim and tyre.
Check the tyre and spare wheel
pressure regularly. The tyre in-
flation pressure is shown in sec-
tion “Technical specifications”.
CHANGING A WHEEL
Please note:
– The jack weighs 1.85 kg
– The jack requires no adjustments
– The jack cannot be repaired. If it
breaks it must be replaced with a new
jack
– No tool with the exception of the
handle can be fitted on the jack.
2) Turn the engine off and pull up the
handbrake.
3 Engage first or reverse gear.
4) Either move the left-hand front
seat back forwards (Fiat Doblò Car-
go versions) lifting lever A-fig. 2 and
take the tool bag shown in fig. 3 or lift
the rear seat (for Fiat Doblò Passen-
ger Transport versions) with lever B-
fig. 4 and take the bag shown in fig.
5. Take the bag to the wheel to be re-
placed.
5) Take the wheel removal wrench.
A
fig. 2
F0A0040b
fig. 3
F0A0094b
119-148 Doblo GB 9-05-2008 12:09 Pagina 122