Fiat Doblo Owner's Handbook Manual - page 171
170
VEHICLE MAINTENANCE
Changing the rear window
wiper blade
1) Lift the cover A-fig. 24 and fig.
25 and dismantle the arm from the ve-
hicle by unscrewing the nut B which
holds it onto the knuckle.
2) Position the new arm correctly
and fasten the nut.
3) Lower the cover.
SPRAY NOZZLES
If there is no jet of liquid, first make
sure that there is liquid in the reser-
voir: see “Checking fluid levels” in this
section.
Then make sure that the holes in the
nozzles are not clogged up. Use a pin
for this if necessary.
The windscreen washer jets fig. 26
can be directed by adjusting the incli-
nation of the nozzles. Direct the spray
so that it reaches the highest point
reached by the blades.
A
B
fig. 24
F0A0158b
A
B
fig. 25
F0A0159b
The rear window washer jet fig. 27
can be directed by adjusting the di-
rection of the nozzles.
fig. 26
F0A0160b
fig. 27
F0A0161b
149-173 Doblo GB 9-05-2008 12:10 Pagina 170