G-Technology G-DRIVE mobile USB Installation Manual - page 11
Page 11
G-DRIVE Product Guide
13. Windows will format the volume and then display the
following window. Disk 1 is now identified as G-DRIVE (E:).
Exit the Computer Management console
14. G-DRIVE will now be displayed as an available hard
disk drive under My Computer as shown below.
G-DRIVE is now set up for use!!
7.3. Cross Platform Use
To setup your G-DRIVE for use on both Windows and
Macintosh systems, use the Apple Disk utility and format
G-DRIVE FAT32.
1. Open the Apple Disk Utility. (The Apple Disk Utility is in
the Utilities Folder located in the Applications Folder
on your system drive). A window like the one below will
appear.
2. Select the G-DRIVE from the left-hand column, then
select the “Erase” button at the top as shown. Select
MS-DOS File System from the drop down menu and
Enter “G-DRIVE” in the Name field.
3. Click on the erase button and the screen on the next
page will appear.