G-Technology G-DRIVE mobile USB Manual - page 5
Attention Mac OS X Users
G-DRIVE is set up at the factory for use with
Mac OS X systems. If you are running Mac OS X,
G-DRIVE will mount on the OS X desktop right
out of the box. If it becomes necessary to re-
format G-DRIVE for Mac OS X, go here.
Attention Windows Users
G-DRIVE must be formatted for the Windows
Operating System before using the G-DRIVE.
For more information about using the G-DRIVE
for Windows XP, Windows Vista or Windows 7 use,
please visit: http://www.g-technology/support/windows
Attention Cross-Platform Users
G-DRIVE can be used on both MAC and PC
systems by formatting the drive “FAT32.” There
are some limitations when using FAT 32.
Alternatively you can install software on the
Windows machine such as “MacDrive” which will
allow you to mount MAC formatted drives on
your PC.
For more information about using the G-DRIVE
for cross-platform use, go here.
Installing G-DRIVE
G-DRIVE attaches to your computer via an eSATA, USB 2.0 or
FireWire 800 port. FireWire 400 connectivity is handled by a 9
to 6 pin cable (included). Choose the connection appropriate
for your system and connect G-DRIVE with the supplied cable.
Connect the supplied power cord to the Power Supply and
plug the other end into a surge protector or wall outlet. Turn
on the power switch and the G-DRIVE will mount on the
desktop.
5