Gaggenau BM 270 Instruction Manual - page 11
11
Setting the microwave
1
Turn the function selector two notches clockwise
to the "Microwave" setting.
The & microwave symbol appears in the display.
2
Set the microwave power using the left-hand
rotary knob.
3
Use the @ or A touch key to set the cooking time.
4
Start with the I touch key.
Operation starts. The cooking time starts counting
down in the display.
A signal sounds once the time has elapsed. The signal
stops when you touch the G touch key or open the
door. Microwave operation has finished.
If you open the oven door during operation, the
microwave function is paused. After closing the door,
touch the I touch key. Operation continues.
You can change the cooking time at any time using @
or A.
You can change the power at any time using the left-
hand rotary knob. Press I to restart.
You can call up the elapsed cooking time using the =
touch key. Use > to return to the standard display.
Pause: You can use the H touch key to pause
operation. Select I to continue operation.
Switching of f: To stop operation and delete the
settings, touch the H touch key for 4 seconds or turn
the function selector to 0.
Note: It is normal for the fan to continue operating
even when the door is open.
Sequential operations
When setting sequential operations, you can set up to
three different microwave power settings and times,
which can run consecutively.
Always use microwave-safe, heat-resistant ovenware.
Setting sequential operations
1
Turn the function selector two notches clockwise
to the "Microwave" setting.
The & Microwave symbol appears in the
display.
2
Touch the ª symbol.
The Sequential operations menu is displayed.
3
Set the microwave output and duration for the
first phase.
4
Use C to select the second phase.
5
Set the microwave output and cooking time for
the second phase.
6
Use C to select the third phase.
7
Set the microwave output setting and cooking
time for the third phase.
8
Touch the > touch key.
The main menu for the sequential operations is
displayed. The settings for each phase are shown
in the display.
9
Start with the I touch key.
Operation starts. The cooking time starts
counting down in the display.