Gaggenau BM 270 Instruction Manual - page 6
6
Your new appliance
Use this section to familiarise yourself with your new
appliance. The control panel and the individual
controls are explained here. You will find information
on the cooking compartment and the accessories.
Display and operating controls
Function selector positions
i Touch key
You can use the i touch key to call up additional
information.
Before starting, you are shown information, for
example, on the operation mode or microwave power
which has been set. This allows you to check if the
current setting is suitable for your meal. With
automatic programmes, you are shown information
about the ovenware and on positioning the
accessories in the cooking compartment.
During operation, you are shown information, for
example, on the elapsed and remaining time and on
the current cooking compartment temperature
(100 °C upwards).
Important information on safety and operation mode
are intermittently shown automatically. These
messages disappear automatically after several
seconds or must be confirmed with G or >.
Display
The top third shows the display bar or
a menu that you have called up. The
different setting parameters are dis-
played in the lower section.
Touch keys
The touch keys to the right and left of
the display are activated by touch.
The touch keys have a different func-
tion depending on the setting. The
current function of the touch key is
shown by the symbol next to the touch
key.
Rotary knob (1)
Use the rotary knob to set the temper-
ature, grill setting, microwave output
and automatic programmes.
Function selector (2) Use the function selector to set the
operation mode and the basic set-
tings. Turn the function selector one
notch clockwise to switch on the
light.
Position
Function
0
Zero position
1
Light/Basic settings
2
Microwave
3
Combination mode
4
Oven
5
Grill
6
Combi cooking automatic programmes
7
Cooking automatic programmes
8
Defrost automatic programmes