Gaggenau CM 210 Use And Care Manual - Switching On The
11
Take hold of the appliance by the recessed grip 11
and pull forwards.
Connect the coiled cable to the chassis.
Fill water tank 19 with cold fresh water.
Do not fill above “max. mark.
Fill the bean container 17 with coffee beans.
Set power switch to I.
Return the inner compartment into original position.
Set function selector to
).
Press button
V.
The appliance is ready for use when the
illuminated rings on button
V and on the
n button are lit green.
Note: If the appliance is being used for the first time or
has not been operated for a prolonged period, the first
cup of coffee will not have the full aroma.
When switched on for the first time, the water pipe system
in the appliance may have to be refilled:
Press the
n button.
To change the display to the desired language:
Hold down button
q on the display for at least
3 seconds.
Press button
q until the display flashes.
Select the desired language with
r or s.
Press button
q to save the language.
Press the
o button.
Switching on the
appliance
COFFEE
Filling up the pipe
system
Fill up PresS
pipe-sys CAFE
PIPE-SYS
FIlls up
Selecting the language
LANGUAGE
english