Gaggenau CM 210 Use And Care Manual - Standby Mode
24
De-activating the setting:
Set the time to
--:-- with r or s.
Note: The current time must be set for this function to
run.
The switch-on time is retained even if there is
a power failure or the main power switch 1 is
turned off.
This function is used to specify after how many hours
following the last brew the appliance automatically
switches to standby mode.
Hold down button P on display for at least
3 seconds.
Select
OFF IN with r or s.
Press button
q, hours display flashes.
Change the setting with
r or s.
Press button
q to save the setting.
Press the
o button. Back to standby.
The switch-off time is retained even if there is
a power failure or the power switch 1 is
actuated.
The number of brewed espressos, coffees and preground
coffees is displayed here. The number of brews are
counted automatically.
Hold down button P on display for at least
3 seconds.
Select
n0.BREwS with r or s.
Press the
o button. Back to standby.
This number cannot be changed!
Possible from “standby" mode only
Simultaneously hold down
r and s for at least
3 seconds – all saved settings are deleted.
The display indicates the messages in the
German language after the RESET function.
Standby mode
OFF IN
4 hours
Off in
2 hours
Displaying number
of brews
no.brews
- - - 86