Gaggenau CX480 Instruction Manual - When The Cooking Time Has
11
4
Touch the
G
symbol. The set cooking time has
been applied. The cooking time starts conunting
down in the display.
When the cooking time has
elapsed
When the cooking time has elapsed, the cooking
position switches off. A signal sounds.
00.00
‹
and
power level
0.0
light up in the cooking position
display.
Note:
You can set a cooking time of up to 9 hours and
59 minutes. Depending on the power level set, the
cooking position may also switch off before the
cooking time has elapsed. See section
Safety shut-
down
.
To correct the cooking time:
select the cooking
position and touch the
6
symbol. Reset the cooking
time. To apply the cooking time, touch the
G
symbol.
To delete the cooking time:
select the cooking
position and touch the
6
symbol. To delete the
cooking time, return to
00|00
‹
and touch the
G
symbol.
Safety shut-down
If a cooking position is in use for a long time without
the settings being changed, the safety shut-down is
activated.
The cooking position switches off. “
Cooking position
in use for too long
” appears in the display. Touch the
G
symbol. The display goes out. You can make new
settings.
When the safety shut-down is activated depends on
the power level which has been set. For more
information, see section
Resolving malfunctions
.
Transferring settings
Short-term memory
As soon as you lift the cookware or move it on the
cooktop, all settings of the cooking position are saved
for a short time (10-90 seconds). The cooking position
does not heat.
Note:
For the duration of the short-term memory, you
can change the settings of the cooking position
(exception: booster function and timer).
Place the cookware back onto the same position
within the duration of the short-term memory. The
settings are automatically applied. The cooking
position heats up.
Notes
‒
If the position differs significantly from the
original position, use the transfer function
‒
To find out how to change the duration of the
short-term memory, see section
Options menu
.
Transfer function
With this function, you can transfer the settings of one
cooking position to another cooking position.
1
Place the cookware at another position on the
cooking surface within the duration of the short-
term memory. The new cooking position is
detected.
PLQ
K
PLQ
K
K
PLQ