Gaggenau CX480 Instruction Manual - Tips
16
To close the notes, touch the
G
display area.
Note:
Notes are displayed with a blue line.
Warnings
Warnings are displayed if an error occurs within the
appliance which means you can only continue to use
the cooktop with limitations. Follow the instructions
on the display and touch the
G
display area to close
the warning.
Notes
‒
Warnings are displayed with a red line.
‒
For some warnings, an error code is displayed
(e.g.: [C3])
If necessary, specify the error code when you contact
the after-sales service.
Error messages
Error messages are displayed if errors or malfunctions
occur within the appliance with the result that you
cannot continue to use the cooktop.
Disconnect the appliance from the power supply. Wait
a few seconds and reconnect it. If the display appears
again, call the after-sales service.
Note:
For some error messages, an error code is
displayed (e.g.: [C0])
If necessary, specify the error code when you contact
the after-sales service.
Tips
,QIRUPDWLRQ
7KHKRWSODWHVZLWFKHVRIIDXWRPDWLFDOO\RQFHDVHW
FRRNLQJWLPHKDVHODSVHG6FUROOXSWRVHWWKH
FRRNLQJWLPH7RXFKWKHFRQILUPDWLRQV\PEROWR
DFFHSWWKHFRRNLQJWLPH
5HVWULFWHGIXQFWLRQV
,IWKHSUREOHPSHUVLVWVVZLWFKWKHDSSOLDQFHRIIDQG RQDJDLQDWWKHKRXVHIXVHRUFLUFXLWEUHDNHULQWKH IXVHER[&DOOWKHDIWHUVDOHVVHUYLFHDVVRRQDV WKHGLVSOD\DSSHDUVDJDLQ >&@ 6\VWHPHUURU 'LVFRQQHFWWKHKREIURPWKHSRZHUVXSSO\ :DLWDIHZVHFRQGVDQGUHFRQQHFWLWDJDLQ ,IWKHGLVSOD\GRHVQRWJRRXWFDOOWKH DIWHUVDOHVVHUYLFH >&@ Problem Remedy The size or shape of the cookware is not displayed correctly on the Touch display. Differences in how the cookware is shown on the display are normal and do not adversely affect the correct operation of the hob (particularly small cookware is shown as a round hotplate). Two hotplates that are quite close to each other may be displayed as one hotplate. Redistribute the cookware. Never place the cookware outside of the usable cooking surface. The hotplate power level cannot be increased. The overall output of the hob has been limited. Adjust the overall output under “ Power management ” in the Options menu. Very large cookware may affect the maximum power level of other hotplates on the same half of the hob. Redistribute the cookware. The booster function has been deactivated or cannot be activated. You can only activate the booster function once on the right and left-hand halves of the hob. If a second hotplate is switched on or is already in operation, the booster function will not be available or is deactivated and the hotplate returns to power level 9.0 . The overall output of the hob has been limited. Adapt the overall output under “ Power management ” in the Options menu.