Gainsborough G+ Series User Manual - page 17
27
26
Section 2
Set up
hOW TO maKE CaLLS BETWEEN G+ INTErNaL DISPLay uNITS
There are two ways to make calls between G+ Internal Display Units:
1 To call to all G+ Internal Display Units:
– Press the
button, all other receiving G+ Internal Display Units
will chime
– Press the
button on a receiving G+ Internal Display Unit
to answer the call.
2 Room to room private call:
– Press the required G+ Internal Display Unit’s room number
. Only that G+ Internal Display Unit will chime
– Press the
button on the receiving G+ Internal Display Unit
to answer the call.
hOW TO BrOaDCaST TO aLL ThE OThEr G+ INTErNaL
DISPLay uNITS
To broadcast to all other G+ Internal Display Units, press and hold the
button for 2 seconds, release the
button, then speak.
Section 2
Set up
hOW TO SET aN G+ INTErNaL DISPLay uNIT TO
“DO NOT DISTurB”
“Do not Disturb” mode stops the G+ Internal Display Unit from chiming
if the G+ Cameras are activated or calls are made from another
G+ Internal Display Unit.
• Cameras can still be viewed.
• The screen will still display calls from the G+ Cameras or other
G+ Internal Display Units.
To activate “Do not Disturb”:
• Press the
button for 2 seconds on the G+ Internal Display Unit.
To cancel “Do not Disturb”.
• Press the
button for 2 seconds.
INDICaTOr LIGhT STaTuS
aCTION
mODE
Red
Stand-by mode
Green
Active mode
Red flashing
Do not disturb (Stand-by)
Green flashing
Do not disturb (Active)