Gainsborough Gplus HOME PORT User Manual - page 16
10
INPuT (from controlling devices)
Function overview
The G+ Home Port has 3 inputs that control the following
In the case of a G+ Lockset
– Input 1: N/A
– Input 2: Privacy Mode
– Input 3: Passage Mode
In the case of a G+ Smart Box or G+ enabled Gliderol garage door
– Input 1: a G+ Smart Box / G+ enabled Gliderol garage door
– Input 2: a G+ Smart Box / G+ enabled Gliderol garage door
– Input 3: a G+ Smart Box / G+ enabled Gliderol garage door
Additional devices a can be assigned to the 3 inputs.
The inputs will only respond once per activation i.e. the G+ Home Port
will only send a command once to the Powered G+ Lockset or G+ Smart
Box for every time the Input is activated. Leaving the Input activated
will not result in the G+ Home Port continuing to send the command.
Wiring Instructions Guidelines
TaKE CarE - ElECTrICITy KIlls!
switches, power outlets and other fixed wired products must be installed
by a licensed electrical contractor or similarly qualified person.
NoTE: The installer should consider strain relief for all cables.
NoTE: The installer is responsible for ensuring the compatibility of systems
being connected to the G+ Home Port.
section 2
Wiring