Gainsborough Gplus HOME PORT User Manual - page 18
12
section 2
Setup
Setup
ProGraMMING
Programming G+ Home Port to a G+ Lockset
• Press the G+ Home Port Lock Teach button until the teach light is on.
• Press the G+ Lockset Teach button, (via paper clip or similar), until
the Teach Confirmation Sound is heard – approx 3 seconds.
• Wait for Lockset to emit a single beep confirming successful
recognition of the G+ Home Port.
• Wait for G+ Lockset to end its Teach session.
• The G+ Home Port will automatically end its teach session after
approximately 5 minutes.
– The G+ Home Port teach session can be ended earlier by activating
one of its inputs.
Programming G+ Home Port to a G+ Smart Box
• Press the appropriate G+ Home Port Lock Teach button until light is on.
• Press the appropriate G+ Smart Box Teach button until the Teach
Light illuminates and blinks – approx 3 seconds.
• Wait for G+ Smart Box Light to blink confirming successful
recognition of the G+ Home Port.
• Wait for G+ Smart Box to end its Teach session.
• The G+ Home Port will automatically end its teach session after
approximately 5 minutes.
– The G+ Home Port teach session can be ended earlier by activating
one of its inputs.