Galaxy Audio AS-1400 User Manual - Contents
Contents
Introduction
1
Introduction........................................................................................................................1
Safety.................................................................................................................................2
System Components..........................................................................................................3
AS-1400T Transmitter Features..........................................................................................4
AS-1400R Receiver Features.............................................................................................5
System Setup..................................................................................................................6-7
Mono/Stereo/Mixed Setup..................................................................................................8
Specifications.....................................................................................................................9
Parts and Accessories........................................................................................................9
Wireless Tips....................................................................................................................10
Thank you for choosing a Galaxy Audio professional wireless in-ear monitor system. You have joined thousands of
other satisfied customers. Our years of professional experience in design and manufacturing ensure our products’
quality, performance and reliability.
1. Introduction
1. EIA-standard metal materials half - rack transmitter chassis.
2. Durable, ergonomic plastic body Receiver with soft-touch controls.
3. 42MHz Bandwidth, 275 Selectable UHF frequencies
4. PLL (Phase Lock Loop frequency control) design ensures transmission reliability, “Noise Lock” squelch
effectively blocks stray RF.
5. Designed to provide incredible audio quality and reliable performance for artists, broadcasters and other
demanding audio environments.
2. Transmitter Installation and Connections
Installation
1. For better operation the transmitter should be at least 3ft. (1m) above the ground and at least 3ft. away from
a wall or metal surface to minimize reflections.
2. Keep antennas away from noise sources such as computer, digital equipment, motors, automobiles and
neon lights, as well as away from large metal objects.
3. Antenna are normally positioned 45° from vertical for best transmission.
4. Keep open space between the receiver and transmitter for better reception.
5. The transmitter should be at least 6ft. (2m) from the receiver.
Connections:
1. The 12V, 300mA switching power supply is designed to operate properly from any AC power source without
user adjustment. Simply connect the transmitter to a standard AC power outlet, using only an IEC-type input
cordset approved for the country of use. Power to the unit is controlled by the front panel power switch.
2. There are two audio inputs on the rear panel: 1/L and 2/R audio INPUTS. Suitable for an XLR balanced
audio input connector or a balanced/unbalanced 1/4" (6.3mm) input connector. The two audio inputs
simultaneous feed from two different outputs. Use the appropriate shielded audio cable for connections
between the transmitter and the output(s) of the mixer or other audio output equipment.