Game Ready 550550 User Manual - page 11
EN-10
Step 10:
You can choose to operate in either Manual Mode or Program Mode.
Manual Mode allows you to adjust time and pressure settings.
Program Mode allows you to choose one of six programs that provide
treatment for a set time then sleep (no treatment) for a set time,
continuously, at a specific pressure setting. The unit will default to
Manual Mode.
Step 9:
Press
the power button. The screen should light up and theControl
Unit should beep once. The power indicator light should turn from
orange to green. Turn the temperature knob to full cold until flow is
established.
Step 11:
Press
play/pause button.
Step 12:
Adjust
the temperature by turning the temperature knob. Turning the
knob clockwise, toward 3 snowflakes, will provide more cold therapy.
Turning the knob counter-clockwise, toward 1 snowflake, will provide
less cold therapy.
Manual Mode:
Set the time by pushing the +/- buttons.
Set the pressure by pushing the pressure button. You can select
from 4 pressure settings: No pressure, Low Pressure (5-15 mmHg),
Medium Pressure (5-50 mmHg), High Pressure (5-75 mmHg).
program Mode:
Push the program button to enter Program Mode. In Program
Mode, the unit will operate continuously according to the selected
program. You will need to add ice approximately every 3-4 hours.
You can select from the following programs: (Push the Program
Button to scroll through the available programs.)
program 1:
30 minutes on, 30 minutes sleep. No pressure.
program 2:
30 minutes on, 30 minutes sleep. Low pressure.
program 3:
30 minutes on, 30 minutes sleep. Medium pressure.
program 4:
30 minutes on, 60 minutes sleep. No pressure.
program 5:
30 minutes on, 60 minutes sleep. Low pressure.
program 6:
30 minutes on, 60 minutes sleep. Medium pressure.
program d:
Drain Mode. Please refer to page 4 in this manual for
details.
U S i n G Y o U r G A M e r e A d Y S Y S t e M