Gamma Scale Sartorius PMA 35D-X Nstallation And Operating Instructions - page 7
7
15. Fill to 0.0 g.
0.0 g
14. Pour in the 2nd component;
“C2” flashes on the display.
– 2.0 g
13. Press the [MEM] key (9)
ST 01
Example:
1. Place an empty paint can
on the load plate (1).
+ 118.0 g
2. Press the = key (4).
0.0 g
3. Pour in the 1st component.
+ 50.0 g
4. Press the [MEM] key (9).
ST 01
5. Pour in the 2nd component.
+ 110.0 g
6. Press the [MEM] key (9)
ST 02
7. Pour in the 3rd component.
+ 203.0 g
Oops! You poured in too much.
The correct weight for the
formula is
200.0 g.
8. Press the y key (10) to
start the recalculation mode.
A “C” (= correct) flashes
on the display.
9. Press the y key (10) to
correct the value to:
+ 200.0 g
10.Press the [MEM] key (9)
ST 03
11. Add the 1st component;
“C1” flashes on the display.
– 1.5 g
12. Fill to
0.0 g.
0.0 g
16. Press the [MEM] key (9);
the scale now automatically
returns to the formula
weighing mode.
+ 200.0 g
17. Press the [REC] key (8) to
check what the total weight
will be “A” = Amount
(displayed in liters)
A 1.03
18. Pour in the 3rd component.
+1000.0 g
We have come to the end
of our example.