Ganz CTR-024N-2 Instruction Manual - page 27
(10/2000)
27
Programming
Keypad locked
You can block the VCR operating controls (and
therefore menu access) in order to prevent
accidental or unauthorised operation of the unit. The
video recorder does not respond to any control
button while this feature is active.
- Move the switch marked LOCK to its ON position.
The keypad is now blocked, “K.LOCK” appears
on the display and the LED situated beneath the
KEY LOCK sign lights up.
Default settings
You can return the video recorder to its default
settings if, for example, you suspect that it has been
programmed incorrectly or if the unit’s operating
circumstances have changed. The RESET button is
located on the back of the unit.
- Press the RESET button with a ball-point pen or
similar item. All user-defined program settings are
now cancelled.
- Ensure before proceeding that all menu configu-
rations and operating parameters correspond to
your needs.
ALARM
ALARM
INDEX
MENU
COUNTER
ENTER
CLEAR
LOCK
SHARPNESS
ON
OFF
SOFT
HARD
TRACKING
CURSOR
DOWN
UP