Ganz CTR-024N-2 Instruction Manual - page 28
(10/2000)
28
Care and Maintenance
Care and maintenance
Care and maintenance
Care and maintenance
Care and maintenance
Care and maintenance
Cleaning the unit
DANGER of electric shock
Ensure that no liquid of any type is allowed
to enter the unit. The entry of liquids into
the housing can lead to fatal electric shock.
Wipe down the outside of the video recorder
regularly with a soft damp cloth, using a neutral
cleaning product to improve dirt-removing efficiency,
if required.
Caution
Do not use abrasive or corrosive cleaning
products or solvents, as they are likely to
damage the surface of the unit.
Cleaning the recording/playback head
The video recorder is fitted with a self-activating
head cleaning mechanism, which operates briefly
each time a tape is loaded into the unit.
Thorough cleaning is required after every 1,500
hours of operation, although more frequent cleaning
may be advisable under certain circumstances, such
as after the regular use of old cassettes.
Use the VCR SET UP menu to read the current total
operating hours of the recording/playback head (see
page 24).
Caution
Clean the head using a special cassette
designed for the purpose, carefully
following the instructions supplied by the
manufacturer of the head-cleaning tape. If
in doubt, please contact the CBC Technical
Service Department.
Regular inspections
This video recorder is a low-maintenance unit,
designed to provide reliable long-term operation. It
should however be subjected to a thorough inspec-
tion every10,000 operating hours to guarantee its
correct and trouble-free functioning. This inspection
includes the testing of all mechanical parts and drive
system components, with replacement as required.
All inspection work should be carried out by CBCís
Technical Service.
Please contact your nearest CBC branch or
authorised agent.
Caution
Do not attempt to carry out inspection work
yourself and do not remove or try to
replace any of the playback/recording head
or drive system components, as this can
result in serious damage to the video
recorder.
Fuse replacement
The main internal fuse is not user-accessible. All
blown fuses must be replaced by CBCís Technical
Service when rectifying the corresponding fault.
Caution
Do not attempt to carry out fuse replace-
ment yourself. If a malfunction occurs in the
unit, it must be checked to ensure overall
operating safety.
Battery replacement
The battery is permanently soldered into the unit. If
you suspect that the battery is no longer charging
correctly (e.g. frequent clock/date resets required) it
must be replaced by CBCís Technical Service.
Caution
Do not attempt to replace the battery
yourself, as this can result in serious
damage to the video recorder.