Ganz CTR-024N-2 Instruction Manual - page 31
(10/2000)
31
Appendix
Resale, disposal
If you sell or otherwise transfer ownership of the
video recorder, be sure to hand it over along with
these installation and operating instructions.
The video recorder contains environmentally
harmful substances, so ensure that eventual
disposal or scrapping is carried out according to the
corresponding rules and legislation in this area.
Have defective or unserviceable units and compo-
nents disposed of by a specialist waste-collection
organisation, or ensure that they are consigned to
your local special refuse facility.
Technical specifications
Supply voltage
100 - 240 VAC, 50/60 Hz
Power consumption
13 W (approx.)
Fuse rating
250 V T, 1.6 A
Video system
VHS NTSC
Video input
1 X BNC, VBS 1.0 Vp-p 75 Ohm
Video output
1 X BNC, VBS 1.0 Vp-p 75 Ohm
Recording system
4 heads, azimuth helical scan device
Rewind time
approx. 60 sec. (E-180 tape)
Signal-to-noise ratio
> 43 dB
Audio input
1 X Cinch, -7.8 dB, >47 kOhm
Audio output
1 X Cinch, -7.8 dB, <1.5 kOhm
Audio frequency range
200 Hz ... 10 kHz
Operating conditions
Temperature: 5 - 40
0
C
rel. air humidity: 80%, non-condensing
Storage conditions
Temperature: 0 - 50
0
C
If you intend to store the unit for longer than one month,
add fresh desiccant and protect the device from moisture
by packing it in a sealed container.
Dimensions (W X H X D)
360 X 94 X 270 mm
Weight
3.8 kg (approx.)