Ganz DR4N-Lite Instruction Manual - page 19
CAMERA TITLE : Determines whether the camera title is displayed.
EVENT ICON : Determines whether the DVR recording status is shown at the top right of each channel
display window.
BORDER : Determines whether there is a border around each channel in multi screen display mode.
MOTION SENSOR DISPLAY : If false motion recording is occurring, the operator can use this feature to
determine and rectify the cause in realtime.
OFF – normal display mode.
ACTIVE – areas where motion is detected are highlighted with colored blocks.
INACTIVE – areas where no motion is detected are highlighted with colored blocks.
MOTION COLOR: The color of the blocks displayed when MOTION SENSOR DISPLAY is set to
ACTIVE or INACTIVE.
LANGUAGE: To change the Language, after selecting the language, please press the APPLY button, Then system will
reboot and language will be changed.
DISPLAY - MONITOR
Click the MONITOR menu and click the ON/OFF menu.
Then, click the button for ON/OFF.
SEQUENCE DWELL : The time that each screen is displayed in a sequence operation.
DE-INTERLACE MODE : When recording any channels in D1 resolution (704 x 480 / 704 x 576) this should be set to
ON to prevent judder during playback.
ALARM POP-UP MODE : When set to ON, an alarm input will cause the associated channel to display
full screen.
ALARM POP-UP DWELL : Determines how long the full screen popup is displayed after an alarm input.
If the alarm condition continues, the popup screen is displayed constantly.
MOTION POP-UP MODE : When set to ON, motion detection will cause the associated channel to display
full screen.
MOTION POP-UP DWELL : Determines how long the full screen popup is displayed after motion detection.
If motion continues, the popup screen is displayed constantly.
To change any of these settings, highlight MONITOR and press ENTER to select.