Ganz DR4N-Lite Instruction Manual - page 40
Click theSIZE, FPS, QUALITY, AUDIO and ALARM value.
Then, click the value by button to change.
Press ENTER. Recording settings for the selected time period are displayed.
SIZE : Recording resolutions of 352x240/352x288, 704x240/704x288 or 704x480/704x576 can be selected for each
channel.
FPS : Frame rates between 1 – 30(NTSC) or 1-25(PAL) can be set for each channel.
QUALITY : Four different picture recording qualities can be set for each channel.
AUDIO : If audio devices are connected to the DVR, any audio channel can be assigned to any of the
video channels.
ALARM: Select the Alarm channel that related with alarm recording.
During playback, when a particular channel is selected in full screen, the assigned audio channel will
be played back at the same time.
Adjust values as desired and select OK to finish and return to the setting menu. Other time periods
can be configured in the same manner.
Remember that if SCHEDULE MODE is set to WEEKLY, recording settings need to be changed by each day as
well as each particular time
Note: The DVR supports a maximum recording rate across all channels of 120 frames per second
at 352x240 resolutions.
As settings are adjusted, the ‘frames available’ at bottom left displays
the number of available frames still remaining and must always be zero or higher.
If, whilst changing recording settings, this figure becomes negative, recording resolutions
and / or frame rates must be lowered to increase the ‘frames available’ value to zero or above.