Ganz DR4N-Lite Instruction Manual - page 35
Determine the behavior and actions that will trigger the internal buzzer.
Behavior settings
OPERATION : The internal buzzer can be enabled or disabled.
HDD EVENT : Determines whether a hard drive event sounds the buzzer.
MODE : Can be either TRANSPARENT (the buzzer sounds only when the trigger criteria is present)
or LATCHED (the buzzer sounds for a set period of time after the trigger).
DURATION : In LATCHED mode, the time that the buzzer sounds after it has been triggered.
Action settings
ALARM : Determines whether alarm inputs will sound the buzzer.
VIDEO LOSS : Determines whether video loss on any of the selected channels will sound the buzzer.
MOTION : Determines whether motion detection on any of the selected channels will sound the buzzer.
Remember to select “APPLY” and press ENTER to save all settings before exiting these menus
EVENT / SENSOR : EMAIL NOTIFICATION
Click the EMAIL NOTIFICATION menu and
click the each value.
Then, check the usage by clicking.
Determine the behavior and actions that will send an email to a remote user.
Behavior settings
NOTIFICATION : Email notification can be turned ON or OFF.
HDD EVENT : Determine whether a hard drive event sends an email.
BOOTING EVENT: Determines whether a reboot event sends an email.
Action settings
ALARM : Determine whether alarm inputs will send an email.
VIDEO LOSS: Determine whether video loss on any of the selected channels will send an email.
MOTION: Determine whether motion detection on any of the selected channels will send an email.
FREQUENCY: E-mail sending period (10~30MIN)
Email settings must also be configured in MAIL and USER MANAGEMENT settings described