Gardeline 2 in 1 Petrol Grass Trimmer/Brush Cutter Operating Instructions & User Manual - Assembly and Parts List
14
Fig. 6c
Fig. 6d
Fig. 6a
Fig. 6b
Assembly and Parts List
3
4
Fitting/Replacing the cutting blade
The procedure for fitting the cutting blade (18a/18b) is shown in Figures 6a-6g.
To dismantle, proceed in reverse order.
•
Fit the carrier plate (22) onto the spline shaft as shown in Figure 6b.
•
Secure the cutting blade (18a/18b) on the carrier plate (Fig. 6c).
•
Place the pressure plate (23) over the thread of the spline shaft (Fig. 6d).
•
Place on the cover of the pressure plate (24) (Fig. 6e).
•
Look for the hole in the carrier plate, line up with the notch underneath, lock
with the supplied 4mm hex wrench (29), and then fit and tighten the nut (25)
with the spark plug wrench (27) (Fig. 6f/6g). Important: Left-hand thread.
•
The cutting blades (18a/18b) are delivered with plastic protective caps fitted
to them. Remove these caps before use and refit them after use.
GB
IRE
MODEL: GLBC 43
AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk