Gardeline 2 in 1 Petrol Grass Trimmer/Brush Cutter Operating Instructions & User Manual - Instructions
31
Applying grease to the gear unit
Add a little gear grease (approx. 10 g) after every 20 hours of operation.
To do so, open the screw H (Fig. 7c).
Environmental protection
Dispose of soiled maintenance material and operating materials at the appropriate
collection point. Recycle packaging material, metal and plastics.
Ordering replacement parts
Please quote the following data when ordering replacement parts:
-
Type of machine (GLBC 43)
-
Article number of the machine (34.019.97)
- Identification number of the machine (11013)
-
Replacement part number or description of the part required
For our latest prices and information please go to www.einhell.co.uk
Storage and transport
Storage
IMPORTANT!
Never put the equipment into storage for longer than 30 days without
carrying out the following steps.
Storing the equipment
If you intend to store the equipment for longer than 30 days, it must be prepared
accordingly. Otherwise the fuel still remaining in the carburettor will evaporate
and leave a rubbery sediment. This can cause problems when starting up the
equipment and may require expensive repairs.
1
Slowly remove the fuel tank cap to release any pressure that may have formed
in the tank. Carefully empty the tank (6).
2
To remove the fuel from the carburettor, start the engine and let it run until the
equipment stops.
3
Leave the engine to cool (approx. 5 minutes).
4
Remove the spark plug (see 'Maintenance of the spark plug' on page 26).
5
Add one teaspoon of 2-stroke engine oil into the combustion chamber.
Slowly pull the starter cord several times to apply a layer of oil to all internal parts.
Instructions
5
GB
IRE
MODEL: GLBC 43
AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk