Gardena 7883 Operating Instructions Manual - 4. Initial Operation
14
GB
B
Putting into operation
as a stream pump :
A
Putting into operation
as a fountain pump :
6
0
9
9
4. Initial Operation
Note : In the event of an uneven foundation, the fountain can be
vertically aligned with the adjustable ball joint
2
.
1. When using a gargoyle, connect the hose of the gargoyle
to the stepped nipple
6
.
2. Place the UVC Underwater Filter with the fountain on a firm
base so that the filter housing
9
is completely covered by
water.
3. Undo the fixing nut
D
of the ball joint
2
,
place nozzle tube
3
vertically and screw
fixing nut
D
tight again.
4. Connect the mains plug of the UVC Under-
water Filter to an A.C. socket.
Attention : pump starts immediately.
5. Unscrew Water Bell, Fleur-de-Lis or
Water Jets out of the nozzle tube
3
until
the fountain has the required shape.
6. Adjust the size of the fountain with the
regulating valves
5
.
7. Adjust the required amount of water of
the gargoyle with the regulating valves
0
.
Note : When using a ¾
" hose, the front part of the stepped
nipple can be cut off with a saw.
1. Connect the hose of the stream to the stepped nipple
6
.
2. Place the UVC Underwater Filter
with the stepped nipple on a firm
base so that the filter housing
9
is completely covered by water
(max. 2 m under water).
3. Connect the mains plug of the
UVC Underwater Filter to an
A.C. socket. Attention : filter pump
starts immediately.
4. Adjust the required amount of water
with the regulating valves
0
.
5. Putting into Storage
The storage location must not be accessible to children.
1. Remove the UVC Underwater Filter from the pond before frost is
expected, clean and
store in a frost-free place.
2. To avoid difficulties when starting up in the spring, we recom-
mend storing the pump in a frost-free location in a container
filled with water.
The mains plug must not be submerged.
Overwintering /
Storage :
3
D
6
2
0
5