Gardena AccuCut 400 Li Operating instructions manual - 6. Storage
17
GB
Storage :
AccuCut 450 Li :
1. Setting the plant guard
L
to parking position (see
“Adjusting the plant guard” ).
2. Set handle angle to position 3
(see
“Setting the working
position” ).
3. Push slider
M
upwards,
turn handle
N
through 90°
and let slider
M
lock into
place (see arrows
z
P
on
articulated fork and handle
holder).
AccuCut 400 Li :
v
Open clamping lever
I
,
turn upper part of handle
B
through 180° and close
clamping lever
I
again.
Switching the trimmer on :
1. Press and hold the safety lock
O
and then press the start
button
P
on the handle.
2. Release the safety lock
O
again.
Switching the trimmer off :
v
Release the start button
P
on the handle.
6. Storage
The Turbotrimmer must be stored out of the reach of children.
1. Clean Trimmer (see 7. Maintenance).
2. Remove blade from blade carrier for storage
(see 8. Troubleshooting).
3. Charging the battery (see 4. Initial Operation).
4. Store the Trimmer in a dry place protected from frost.
Recommendation :
The trimmer can be hung up by the handle. The cutting head
is not put under any unnecessary strain if the trimmer is stored
hanging up.
Starting the trimmer :
Trimming overhanging
lawn edges :
N
z
P
M
L
O
P
I
B
www.devicemanuals.eu