Gardena AccuCut Li 9850 Operation Instructions Manual - 4. Maintenance
1
2
7
6
To start:
The product is fitted with a starting lock-out
6
to prevent the product
from being turned on by accident.
1. Clear the area to be cut of stones and other solid objects.
2. Remove the protective cover
1
from the blade
2
.
3. Push the starting lock-out
6
forwards and push the start
button
7
.
The product will start.
4. Release the starting lock-out
6
.
To stop:
1. Release the start button
7
.
2. Slide the protective cover
1
over the blade
2
.
4. MAINTENANCE
1
2
DANGER! Risk of physical injury!
Cut injury when the product starts accidentally.
v
Before you maintain the product, make sure that the
protective cover
1
is slid over the blade
2
.
To clean the Grass Shear:
DANGER! Electric shock!
Risk of injury and risk of damage to property.
v
Do not clean the product with water or with a water jet
(in particular high-pressure water jet).
To increase operating time, the product should be cleaned and
sprayed after each use.
1. Clean the product with a damp cloth.
2. Lubricate the blade
2
with a low viscosity oil (e. g. GARDENA
spray-oil Art. 2366). Avoid contact with the plastic parts.
5. STORAGE
To put into storage:
1
2
The product must be stowed away from children.
1. Charge the battery. This increases the life of the battery.
2. Clean the product (see 4. MAINTENANCE) and slide the protective
cover
1
over the blade
2
.
3. Stowe the product in a dry area where it has protection from frost.
14
EN