Gardena PowerMax Li-40/41 Operator's manual - 3. Operation
To connect the lower handle:
3
3
2
1
ß
H
ß
M
ß
L
The handle height can be adjusted in 3 positions.
•
ß
H
High.
•
ß
M
Middle.
•
ß
L
Low.
1. Turn the lower handle
1
that the handle hole is inline with the
hole
ß
H
,
ß
M
or
ß
L
of the height adjusting.
2. Push the screws
2
through the holes.
3. Put the wing nuts
3
on the screws
2
.
4. Tighten the wing nuts
3
.
To connect the
upper handle:
4
1
2
3
3
ß
P
ß
P
1. Put the upper handle
4
on the lower handle
1
.
Make sure that the handles are fully in place and the handle
holes are inline.
2. Push the screws
2
through the holes.
3. Put the plastic washers
ß
P
and the wing nuts
3
on the screws
2
.
4. Tighten the wing nuts
3
.
To fix the cable
to the handle:
6
5
1. Fix the cable
5
to the handle with the clip
6
.
2. Check that the cable
5
is not trapped between the lower and
the upper handle.
3. OPERATION
Before you do operation:
WARNING! Risk of physical injury!
Cut injury when the blade turns or the product starts
accidentally.
v
Wait for the blade to stop, remove the safety key and
use gloves before you attach the battery or transport the
product.
To charge the battery:
CAUTION!
Damage to the battery or the battery charger!
Overvoltage damages the battery and the battery charger.
v
Make sure that you use the correct mains voltage.
Before you use the battery the first time, the battery must be fully
charged.
The lithium-ion battery can be charged in any state of charge and
the charging process can be disconnected at any time without to
damage the battery (no memory effect).
18
GB