Gardena PowerMax Li-40/41 Operator's manual - page 6
q ß
E
C
0
ß
9
8
1. Connect the mains cable
0
to the battery charger
ß
C
.
2. Connect the mains cable
0
to a 230 V mains socket.
3. Connect the charger cable
8
to the battery
9
.
When the charging control lamp
q
at the charger flashes
green once per second the battery is being charged.
When the charging control lamp
q
at the charger is lit green
the battery is fully charged.
For charging time, see 7. TECHNICAL DATA.
4. Check the charge status regularly while you charge.
5. When the battery is fully charged, disconnect the battery
9
from
the battery charger
ß
C
.
6. Disconnect the mains cable
0
from the mains.
Battery charging indicator:
ß
B
W
ß
ß
L1
ß
L2
ß
L3
Battery charging indicator during charging:
100 % charged
ß
L1
,
ß
L2
and
ß
L3
lit
67 – 100 % charged
ß
L1
and
ß
L2
lit,
ß
L3
flashing
34 – 66 % charged
ß
L1
lit,
ß
L2
flashing
0 – 33 % charged
ß
L1
flashing
Battery charging indicator during operation:
Push the button
ß
B
on the battery.
67 – 100 % charged
ß
L1
,
ß
L2
and
ß
L3
lit
34 – 66 % charged
ß
L1
and
ß
L2
lit
11 – 33 % charged
ß
L1
lit
0 – 10 % charged
ß
L1
flashing
Control panel:
W2
ß
La
ß
B2
ß
ß
Lb
Lc
Ld
ß ß
Le
ß
Ls
ß
S
ß
E
ß
Start button:
Push the Start button
ß
S
on the panel.
activated
ß
Ls
lit green
automatic deactivation after 10 minutes without use
Eco button:
Push the Eco button
ß
E
on the panel.
activated
ß
L3
lit green
normal mode 3100 rpm no load
Eco mode 2700 rpm no load
Normal operation or Eco mode 3700 rpm high load over 12 A
Under high loads, the motor speed increases automatically to ensure
the best possible mowing results at all times.
Battery charging indicator during operation:
Push the button
ß
B2
on the panel (The LEDs lit 5 seconds later).
76 – 100 % charged
ß
La
,
ß
Lb
,
ß
Lc
and
ß
Ld
lit
51 – 75 % charged
ß
La
,
ß
Lb
and Lc lit
26 – 50 % charged
ß
La
and
ß
Lb
lit
6 – 25 % charged
ß
La
lit
0 – 5 % charged
ß
La
flashing
19
GB