1. DL manuals
  2. Gardena
  3. Water System
  4. Profi C 1060
  5. Operating Instructions Manual

Gardena Profi C 1060 Operating Instructions Manual

Other manuals for Profi C 1060: Operating Instructions Manual
Manual is about: Water Computer

Summary of Profi C 1060

  • Page 1

    Gb s nl d fi n gardena ® c 1060 profi art. 1815 gb operating instructions water computer profi s bruksanvisning bevattningscomputer nl gebruiksaanwijzing besproeiingscomputer d gebrauchsanweisung bewässerungscomputer fin käyttöohjeet kasteluohjain http://waterheatertimer.Org/how-to-program-gardena-c...

  • Page 2

    3 2 gb gb gardena water computer c 1060 profi welcome to the garden of gardena... Please read these operating instructions carefully and observe the notes given. Use these instructions to familiarise yourself with the water computer and its proper use as well as the notes on safety. For safety reaso...

  • Page 3

    5 4 3. Function this gardena water computer c 1060 profi allows you to water your garden completely automatically any time you choose up to 6 times a day, whether you are using a sprinkler, a sprinkler system installation or a drip-head watering system. Your water computer waters your garden complet...

  • Page 4

    7 6 displays display description 5 weekdays current weekday or programmed watering days. (mo, tu,...) 6 prog. Program selected (1 to 6). 7 special only for controlling the automatic water distributor art.-no. 1198. 8 ttiimmee flashes when in input mode for the current data (hours, minutes, day of th...

  • Page 5

    9 8 the water computer is fitted with a sleeve nut l for taps with g 1 ” (33.3 mm) thread. The adaptor supplied k allows the water computer to be connected to taps with a g 3 /4 ” thread (26.5 mm). Connect water computer to water tap with g 1 ” (33.3 mm) thread : 1. Screw sleeve nut l of the water c...

  • Page 6

    11 10 example : in addition to time-based watering, it is also possible to include the soil moisture or rain sensor in the watering programs. If the soil is moist enough, the program will be stopped, or a program will be prevented from starting. Manual operation via man. On / off is unaffected by th...

  • Page 7

    13 12 2. Set the time in hours with the ▲-key (example: 99 hours) and confirm with the o.K.-key. Ttiimmee and the minutes display flash. 3. Set the time in minutes with the ▲-key (example: 3300 minutes) and confirm with the o.K.-key. Ttiimmee and the day of the week display flash. 4. Set the day of ...

  • Page 8

    15 14 5. Set the minutes for starting the watering time with the ▲-key (example: 2200 minutes) and confirm with the o.K.-key. Rruunn ttiimmee and the hours for the watering time flash on the display. 6. Set the hours for the watering time with the ▲-key (example: 00 hours) and confirm with the o.K.-...

  • Page 9

    17 16 1. Press man. On / off-key to open the valve manually (or to close an open valve). Rruunn ttiimmee and the watering time in minutes (set to 3300 minutes in the works) flash for 5 seconds on the display. 2. Whilst the watering time in minutes is flashing, the watering duration can be modified w...

  • Page 10

    19 18 the factory settings are restored. V press ▲-key and o.K.-key simultaneously for 2 seconds. All the lcd symbols are displayed for 2 seconds and the display moves to the normal display. • all the program data are set to zero. • the manual watering period is set to 00 ::3300 again. • the time an...

  • Page 11

    21 20 the pre-programming takes into consideration the 30 minute break required between the programs as well as a minimum watering time of 30 seconds (display: 11 min.). This watering time is required to allow the automatic water distributor to switch to the next outlet and to ensure that the order ...

  • Page 12

    23 22 gb gb 7. Cleaning the filter should be checked regularly and cleaned when necessary. 1. Unscrew sleeve nut l of the water computer by hand from the tap thread (do not use pliers). 2. Remove filter from sleeve nut l and clean. 3. Screw sleeve nut l of the water computer back on to the thread of...

  • Page 13

    25 24 gb gb fault possible cause remedy watering program is not valve was opened manually v avoid possible program being undertaken previously. Overlaps. (no watering) tap turned off. V turn on tap. Program overlap v enter new watering (1 st watering start time has program without overlaps. Priority...

  • Page 14

    27 26 12. Service gardena guarantees this product for 2 years (from date of purchase). This guarantee covers all serious defects of the unit that can be proved to be material or manufacturing faults. Under warranty we will either replace the unit or repair it free of charge if the following conditio...

  • Page 15

    135 134 f product liability painotamme tuotevastuulain mukaisesti erityisesti sitä seikkaa, että emme vastaa elektroniselle vesiajas- timelle aiheutuneista tai sen aiheuttamasta vahingoista, mikäli ne ovat aiheutuneet epäpätevän korjauksen takia, mikäli elektroniseen vesiajastimeen on vaihdettu osia...

  • Page 16

    136 prog start time run time mo tu we th fr sa so 2 nd 3 rd 1 2 3 4 5 6 prog start time run time mo tu we th fr sa so 2 nd 3 rd 1 2 3 4 5 6 description of the unit : water computer type : art. No.: produktbeskrivning : bevattningscomputer type : c 1060 art.Nr. : omschrijving van het apparaat : bespr...

  • Page 17

    Great britain gardena uk ltd. 27- 28 brenkley way blezard business park seaton burn newcastle upon tyne ne13 6ds greece agrokip g. Psomadopoulos & co. 33 a, ifestou str. – 194 00 industrial area koropi athens hungary gardena magyarország kft. Késmárk utca 22 1158 budapest iceland heimilistaeki hf sa...

  • Page 18

    Singapore hy - ray enterprises block 1002 toa payoh industrial park #07-1433 /1435 /1451 singapore 319074 slowenia / croatia silk d.O.O. Trgovina brodiљиe 15 1236 trzin south africa gardena south africa (pty.) ltd. P.O. Box 11534 vorna valley 1686 spain gardena ibÉrica s.L.U. C / basauri, nº 6 la fl...