Gardena Profi C 1060 Operating Instructions Manual - page 13
25
24
GB
GB
Fault Possible
Cause
Remedy
Watering program is not
Valve was opened manually
v Avoid possible program
being undertaken
previously.
overlaps.
(no watering)
Tap turned off.
v Turn on tap.
Program overlap
v Enter new watering
(1
st
watering start time has
program without overlaps.
priority).
Soil moisture or rain sensor
v If dry, check setting /
reports sufficient moisture.
location of soil moisture /
rain sensor.
Batt. indicator flashes because
v Insert new (alkaline) battery
battery is almost flat.
Water Computer does
Minimum quantity of water
v Connect more drip heads
not close
drawn is less than 20 l / h.
If you have any other problems with your Water Computer, please contact GARDENA Service.
9. Putting Your Water Computer out of Operation
1. Press Menu-key 3 times, select Prog. Off with the
▲-key
and confirm with the O.K.-key.
The watering programs are deleted.
2. Store your Water Computer in a dry place where it is protected
from frost.
Please return flat batteries to a GARDENA dealer or dispose
of them properly at your nearest recycling centre. Only dispose
of batteries when they are flat.
10. Accessories
Automatic control with :
GARDENA Soil Moisture Sensor
Art. No. 1187
GARDENA Rain Sensor electronic
Art. No. 1189
GARDENA Automatic Water Distributor
Art. No. 1198
Over-wintering /
storage :