Gardena Profi C 1060 Operating Instructions Manual - page 7
13
12
2. Set the time in hours with the
▲-key
(example:
99
hours) and confirm with the O.K.-key.
ttiimmee
and the minutes display flash.
3. Set the time in minutes with the
▲-key
(example:
3300
minutes) and confirm with the O.K.-key.
ttiimmee
and the day of the week display flash.
4. Set the day of the week with the
▲-key
(example:
■ Sa Saturday) and confirm with the O.K.-key.
The display moves to the message Insert watering programs
and program memory setting 1 flashes.
You must reset your Water Computer before selecting the
special function (see 6. Automatic Water Distributor).
v Reset : Keep
▲-key and O.K.-key pressed simultaneous
for 2 seconds.
Up to 6 watering programs can be inserted – or –
the special function can be selected.
2.
3.
4.
Enter watering programs :
1. Press Menu-key twice
(not necessary if the current time and day of the week
has been entered).
Program memory setting 1 flashes.
2. Only if the Automatic Water Distributor is used :
Select special-function with the
▲-key and confirm with
the O.K.-key (continue with step 4).
Program memory setting 1 is selected automatically,
ssttaarrtt ttiimmee
and the hours section flash on the display.
3. Select program memory setting with the
▲-key
(example: Prog. 3
■ program 3) and confirm with the
O.K.-key.
ssttaarrtt ttiimmee
and the hours section flash on the display.
4. Set the hours for starting the watering time with the
▲-key
(example:
66
hours) and confirm with the O.K.-key.
ssttaarrtt ttiimmee
and the minutes section flash on the display.
1.
2.
3.
4.
GB
GB