Gardena SmallCut 300/23 Operation Instructions Manual - 2. Assembly
2. ASSEMBLY
DANGER! Risk of physical injury!
Cut injury when the unit starts accidentally.
v
Before you assemble the unit, make sure that the mains
cable is disconnected.
To assemble the trimmer:
click
click
3
1
A
ß
2
M
ß
1. Put the top part of the handle
1
and the trimmer head
2
together
until they make a click (click). Ensure that the two arrows
ß
A
face
each other. The cable must not be stretched or caught when you
do this.
2. Put the bottom handle
3
on the top part of the handle
1
until it
makes a click (click). Ensure that the two arrows
ß
M
face each
other.
click
click
5
4
2
3. Put the cover
4
on the trimmer head
2
while you feed the cutting
filament
5
through the opening in the cover
4
.
4. Put the cover
4
on the trimmer head
2
until it makes a click
(click). Make sure that all cams lock in position.
can possibly injure or kill, we recommend persons
with medical implants to speak with their physician
and the medical implant manufacturer before
operating.
Cables
Use only permitted extension cables as per
HD 516.
v
Ask your electrical specialist.
If the unit got hot during operation, let it cool down
before storage.
4
GB